mechanical meters ≤ 1"

• 

K33 and K44 are nutating-disk meters that measure the exact quantity of the dispensed fuel or lubricant. They are designed for non-commercial use only. These flow-meters are reliable, inexpensive, easy to install and simple to calibrate on the workplace.

The Pulser model is fitted with a pulse emitter for connection to a fuel management system.
Thanks to reduced flow resistance, they can also function by gravity.

Tecnical Data:

Performance Specifications
- Flow-rate (range): 20-120 l/min.
- Precision: +/-1% offlow range after calibration.
- Repeatability: 0,2%.
- Max. operating pressure: 1O bar.
- Bursting pressure: 30 bar.
- Readout system:
- K33, 3-digit subtotals (max 999 litres), 6-digit totals.
- K44, 4-digit subtotals (max 9999 litres), 7-digit totals.
- Resolution: 0.1 litre.
- Pulser card type: "Open collector", frequency: 10 pulses/litre, power supply: 6-24 V DC, max 10 mA.

Technical Features
Aluminium metering chamber with polybutylene nutating disk.
1" G inlet, 1" G outlet, in line. The top can be rotated to give four different flow configurations. Mechanical readout device with rotating wheels. Subtotals can be set to zero, total readouts cannot. Available with litre units or gallon units. The K44/P model is equipped with a Pulser card, "Open collector" type, externally powered by the receiver.